Publicidad
Idiomas disponibles
Idiomas disponibles
Weight
according
to"EPTA
Procedure
kg
01/2003"
(without
battery)
Battery
18V
Weight of
kg
battery
Working
-10-40°C
temperature
Storage
< 50°C
temperature
Charging
4-40°C
temperature
Charger
CA 10.8/18.0, CA 18.0-LD
Overview (see figure A)
The numbering of the product features refers
to the illustration of the machine on the
graphics page.
1.
Lock-off button
2.
Speed dial
3.
Front handle
4.
Tension lock lever
5.
Guard
6.
Blade
7.
LED light
8.
Workpiece guide
9.
9a Guide adjustment screw
(SBE 64 18-EC)
9b Guide adjustment button
(SBE 127 18-EC)
10. Saw hook
11. Main handle
12. Variable-speed trigger switch
13. 13a Blade cover lock
(SBE 64 18-EC)
13b Blade cover lock screw
(SBE 127 18-EC)
14. Hex key
18
3.3
5.9
AP 18.0/2.5
AP 18.0/5.0
AP 18.0/8.0
AP 18.0/2.5 0.42
AP 18.0/5.0 0.72
AP 18.0/8.0 1.1
SBE 64 18-EC/SBE 127 18-EC
15. Blade cover
16. Pully
Operating instructions
WARNING!
Remove the battery before carrying out any
work on the power tool.
Before switching on the power
tool
Unpack the cordless compact band saw and
deep cut band saw, check that here are no
missing or damaged parts.
NOTE
The batteries are not fully charged on
delivery. Prior to initial operation, charge the
batteries fully. Refer to the charger operating
manual.
Inserting/replacing the battery
■ Press the charged battery into the power
tool until it clicks into place (see figure B1 &
C1).
■ To remove, press the release button (1.) and
pull out the battery (2.) (see figure B2 & C2).
CAUTION!
When the tool is not in use, protect the
battery contacts. Loose metal parts may short
circuit the contacts; explosion and fire hazard!
Blades and blade selection
The SBE 64 18-EC band saw is designed to
use 0.5mm thick, 13mm wide, 835 mm long
blades and the SBE 127 18-EC band saw is
designed to use 0.5mm thick, 13mm wide,
1140mm long blades. DO NOT use more than
0.5mm thick blades.
Use a blade with the correct pitch for the
specific cutting job.
To select the proper blade, three factors
should be considered: The size, shape, and
type of material to be cut.
The following suggestions are for selecting
the right blade for various cutting operations.
Blade requirements may vary depending
upon the specific size, shape and type of
material to be cut.
Publicidad
