Lindy 38346 Manual De Usuario página 3

User Manual
Introduction
Thank you for purchasing the 70m Cat.6A HDMI 4K60 & Type C HDBaseT 3.0 KVM Extender. This product
has been designed to provide trouble free, reliable operation. It benefits from both a LINDY 2-year warranty
and free lifetime technical support. To ensure correct use, please read this manual carefully and retain it
for future reference.
The Lindy Cat.6A HDMI 4K60 & Type C HDBaseT 3.0 KVM Extender is a complete high-performance
solution for extending uncompressed AV and control signals over long distances via Cat.6A network cable.
HDBaseT is a globally recognised standard for high quality distribution of AV content and other
technologies, including power and control, over longer distances via low-cost Cat.6 or above cable.
Both units are included, the Transmitter features HDMI, USB 2.0 host, USB 2.0 device ports and a Type
C input supporting DisplayPort Alternate mode, USB 2.0 and 60W charging power to provide any
convenient solution for extending high-end AV and data signals.
HDBaseT 3.0 technology delivers uncompressed resolutions up to 4K Ultra HD, while the USB Service
and RS-232 ports can send APIs and commands to control the unit from a PC or control system.
HDBaseT™ and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.
Please Note: The quoted lengths and resolutions are possible with a direct connection between
Transmitter and Receiver using good quality Cat.6A or above cable. Using a different cable type, or
introducing wall plates, couplers or patch panels may result in a reduction of possible distances.
Package Contents
HDBaseT HDMI & Type C KVM Extender, Transmitter

HDBaseT HDMI & Type C KVM Extender, Receiver

IR Emitter Cable, 1.5m

IR Receiver Cable, 1.5m

4 x Mounting Ears & 8 x Screws

2 x 3-Pin Terminal Block

24VDC 3.75A Multi-country Power Supply (UK, EU, US & AUS), Screw Type DC Jack: 5.5/2.1mm

Lindy Manual

Features
Supports uncompressed resolutions up to 3840x2160@60Hz 4:4:4 8bit, with additional support for

HDR, HDR10, HDR10+, Dolby Vision, HLG
USB Type C port supports DP-ALT mode for AV, USB 2.0 data and power charging up to 60W

HDMI and Type C inputs support auto or manual switching mode

4K to 1080p downscaling function on HDMI output

Audio Pass-through of all HDMI audio formats including Dolby Atmos, DTS, DTS-EX, DTS-96/24, DTS

High Res, DTS-HD, Master Audio, DSD & LPCM
3.5mm Analog Audio supports LPCM 2CH with de-embedding function on both units

Bi-directional PoC (Power over Cable) support, requiring a power supply connection from only one

side of the installation
USB 2.0 support to connect mouse, keyboard and other USB devices

Advanced EDID management

Bi-directional IR Control (20-60KHz) of equipment via the extender

APIs & RS-232 controls, CEC Pass-through

Screw Type DC Jack for a secure power connection

English