Publicidad
Idiomas disponibles
Idiomas disponibles
1
Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer
We hope your new product brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this product assumes no liability for
damage to the product or caused by the product arising
from:
• Improper handling
• Non-compliance with the operating manual
• Repairs carried out by third parties, unauthorised
specialists
• Installing and replacing non-original spare parts
• Improper use
Note:
Read the whole text of the operating manual before as-
sembly and commissioning.
This operating manual should help you to familiarise
yourself with your product and to use it for its intended
purpose.
The operating manual includes important instructions
for the safe, proper and economic operation of the
product, for avoiding danger, for minimising repair costs
and downtimes and for increasing the reliability and ex-
tending the service life of the product.
In addition to the safety instructions in this operating
manual, you must also observe the regulations applica-
ble to the operation of the product in your country.
Keep the operating manual package with the power tool
at all times and store it in a plastic cover to protect it
from dirt and moisture. They must be read and carefully
observed by all operating personnel before starting the
work.
The product may only be used by personnel who have
been trained to use it and who have been instructed
with respect to the associated hazards.
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such products must also be observed.
We accept no liability for accidents or damage that oc-
cur due to a failure to observe this manual and the
safety instructions.
2
Product description (fig. 1, 2, 7)
1.
Front handle
2.
Carrying strap attachment eye
3.
Speed control
4.
On/off switch
22 | GB
5.
Rear handle
6.
Rear hooks
7.
Rear collection bag
8.
Battery mount
9.
Viewing window
10.
Mode selector lever
11.
Collection bag inlet with locking device
12.
Collection bag
13.
Front collection bag
14.
Front hooks
15.
Wheels
16.
Front blast/suction tube
16a.
Screws screws Ø4 x 55mm
17.
Medium blast/suction tube
17a.
Screws screws Ø4 x 13mm
18.
Motor housing
19
Ejection opening
20
Carrying strap
20 a
Carabiner hook
21
Battery*
22
Release button (battery)
* = not included in the scope of delivery!
3
Scope of delivery (Fig. 2)
Item Quanti-
ty
12.
1 x
16.
1 x
16a. 2 x
17.
1 x
17a. 1 x
18.
1 x
20.
1 x
1 x
1 x
4
Proper use
Only use the electric leaf vacuum/blower for the follow-
ing purposes:
• In blowing mode for collecting leaves or general
garden waste such as prunings or for removing
them from hard-to-reach places.
• In suction mode for vacuuming and shredding dry
leaves and other light, loose and non-combustible
garden waste.
• The product must not be used for collecting flamma-
ble or explosive products, hot embers, ashes, burn-
ing cigarettes and pieces of branches, sharp ob-
jects, metal objects, stones and other objects that
could be dangerous for the operator. This can result
in injuries and can damage the product.
The product may only be used in the intended manner.
Any use beyond this is improper. The user/operator, not
the manufacturer, is responsible for damages or injuries
of any type resulting from this.
www.scheppach.com
Designation
Collection bag
Front blast/suction tube
Screws screws Ø4 x 55mm
Medium blast/suction tube
Screws screws Ø4 x 13mm
Motor housing
Carrying strap
Cordless leaf vacuum/blower
Operating manual
Publicidad
