Publicidad
Idiomas disponibles
Idiomas disponibles
10.1
Inserting/removing the battery
(21) in the battery mount (8) (Fig.
7)
Inserting the batteries
1. Push the both batteries (21) into the battery mount
(8). The batteries (21) click into place audibly.
Removing the batteries
1. Press the unlock button (22) of the batteries (21)
and remove them from the battery mount (8).
10.2
Setting the speed (fig. 8)
Notes:
Low speed for light material on the lawn.
Moderate speed for grass and light leaves on asphalt or
solid ground.
High speed for large garden waste.
1. Turn the speed control (3) to adjust the motor speed
from level 1 - 6 to the material to be removed.
10.3
Operating the cordless leaf
vacuum/blower (Fig. 1)
WARNING
Danger of injury!
If the collection bag is not secured during operation of
the cordless leaf vacuum/blower, this can lead to inju-
ries from flying parts.
–
Only use the leaf vacuum when the collection bag
is properly fitted.
–
Close the zip of the collection bag.
–
Ensure that the collection bag is not damaged.
WARNING
Danger of injury!
If you direct the airflow at people, animals or objects,
this can cause injury and damage.
–
Direct the air flow away from you.
–
Never direct the airflow at other people, animals
or objects.
–
Do not blow away hard objects such as stones or
branches.
Notes:
When operating the cordless leaf vacuum/blower, we
recommend a medium/high speed.
Do not vacuum too many leaves at once, do not collect
any wet grass or leaves, this can lead to blockages. Do
not vacuum any hard materials.
28 | GB
1. Place your left hand on the front handle (1) and
your right hand on the rear handle (5). When oper-
ating the cordless leaf vacuum/blower, the collec-
tion bag (12) should be on the right-hand side of the
operator.
2. Always hold the product with both hands during the
work. Grasp with both handles (1 + 5).
3. Move the product gently using the wheels (15)
across the surface.
4. When operating the cordless leaf vacuum/blower,
check the fill level of the collection bag (12) on the
viewing window (9). The sucked-in leaves are
shredded to reduce volume, blown through the ejec-
tion port and collected in the collection bag (12).
10.4
On/Off switch (4) (Fig. 8)
WARNING
Danger of injury from rotating tool!
After switching off the product, the impeller continues
to rotate for some time. Wait until the product has
come to a standstill.
1. When using as a leaf vacuum, make sure that the
collection bag (12) is properly fitted.
2. To switch on the product, push the on/off switch (4).
3. To switch it off, simply release the on/off switch (4).
10.5
Emptying the collection bag (12)
(Fig. 5)
Notes:
Do not vacuum too many leaves at once, do not collect
any wet grass or leaves, this can lead to blockages. Do
not vacuum any hard materials.
If the collection bag is too full this reduces the perfor-
mance of the product and can cause the motor to over-
heat.
The collection bag works like a filter, similar to an ordi-
nary household vacuum cleaner. For this reason, it is
best not to fill the collection bag completely and remove
bulky objects immediately.
1. Switch off the engine.
2. Wait until the product has come to a standstill.
3. Remove both batteries (21).
4. Open the zip of the collection bag (12) and empty
the collection bag (12) without detaching them from
the outlet opening (19).
www.scheppach.com
Publicidad
