Publicidad
Idiomas disponibles
Idiomas disponibles
Place a container under the spout of the bowl.
4.
Turn on the motor by pushing the START button.
5.
6.
With the motor in action put fruit and/or vegetables in the feed chute. Use the food pusher
to gradually push down the fruit and/or vegetables towards the spinning grating disc at
the bottom of the feed chute without exerting excessive pressure (see Fig. 6). To obtain
more juice always press the food pusher lightly.
NEVER USE YOUR FINGERS TO PUSH THE FRUIT AND/OR VEGETABLES DOWN
THE FEED CHUTE OR TO CLEAN THE CHUTE. ALWAYS USE THE FOOD PUSHER
PROVIDED.
The juice will pour from the spout into the container placed below the spout. The separa-
7.
ted pulp will accumulate in the pulp container.
8.
Continue to use the appliance until the container is filled with juice or until you have fini-
shed the fruit or vegetables you are using or ensure the pulp container has become filled
with pulp..
Turn the motor off by pushing the STOP button.
9.
Note: Always wait until the motor has come to a complete stop before unhooking the
locking arm.
Never use the locking arm to turn the appliance off. This could wear out the safety mecha-
nisms (safety microswitch and motor brake).
10.
When the appliance is not in use leave the locking arm hooked to the juicer cover.
When using the appliance control the level of pulp in the pulp container (with the motor
turned off). The quantity of fruit or vegetables that can be used before the pulp container
is filled varies depending on the type of fruit or vegetables used.
Should blockage occur while the appliance is in use before the pulp container is filled with
pulp it is a good idea to turn the appliance off and find the cause of the blockage.
Note: When using the juice extractor the pulp container can be emptied by turning the
appliance off and carefully removing the pulp container. (Put the pulp container in place
before turning the juice extractor back on).
GB
Fig. 5
Publicidad
