Publicidad
Idiomas disponibles
Idiomas disponibles
10
ADJUSTMENTS
10.8 LANDROLL SCRAPER
The Landroll scraper should be taught but not so
taught as to distort the side plates. If the scraper
becomes loose tighten by adjusting the self locking
nuts (A) at each end of the scraper. If all adjustment
is used up replace the scraper.
10.9 LANDROLL CLUTCH ADJUSTMENT
Slacken locknuts (A) and rotate the adjuster so that
the lever (B) just touches the pin (C).
Back-off the adjuster (or locknut) one complete turn
so that the lever is not touching the pin.
Tighten the locknuts to lock the adjustment in this
position.
GB-38
SAFETY, OPERATORS & MAINTENANCE MANUAL
C
B
A
RANSOMES SMALL PEDESTRIAN RANGE
Publicidad
