LX NEWTON 55 Instrucciones De Manejo página 30

always be set to the last mode before it was switched off.
4.5 OPERATION
Select the dose to be dispensed by pressing the related buttons (11)
the selected button lights up. Place the filter holder cup on the fork (7), making sure
that it is precisely under the dispensing spout (6) and press the selected dose key.
Dispensing ends when the time set in programming has elapsed. Then the grinding
time returns to the set value and the grinder is ready for a new cycle.To activate
continuous grinding, simultaneously press the keys (11)
symbol will appear on the display (12)
are pressed.
ATTENTION
Automatic dispensing can be stopped before the grinding time has elapsed.
During dispensing, press the button of the selected dose to stop dispensing:
• Press the button again to resume dispensing for the remaining time;
• Press and hold the dose button for a few seconds to end dispensing. The
grinding time will return to the set value.
4.6 DOSE ADJUSTMENT
• Keep the dose button (11)
(10) or (13)
dose by 1 tenth of a second more or less. If pressed for a long time, the time is
increased or decreased by however long the key is pressed.
4.7 DOSE ADJUSTMENT LOCK
Press keys (10)
dispensing time adjustment. On the display, the symbols inside the two buttons will
darken. Press once again the area on the display previously occupied by the buttons
(10) and (13)
4.8 DOSE COUNTER DISPLAY
Press and hold the central button (14) for 5 seconds, then select one of the two
counters:
• Dose 1 button (11)
• Dose 1 button (15)
30
or (15)
to decrease or increase the dispensing time of the selected
and (13) simultaneously for a few seconds to lock the dose
to unlock the adjustment.
: access to the counter of the 1 doses.
: access to the counter of the 2 doses.
and (15)
. Dispensing will last as long as the buttons
pressed down. Then press the buttons
EN
oR (15)
the following