Correct Posture; General Notes - Beurer BM 58 Manual De Instrucciones

Insert the cuff tubing into the
socket for the cuff attachment on
the left side of the unit. Make sure
it is inserted securely in the main
unit and that there are no kinks in
the cuff tubing.
Important: This instrument should only be operated with
the original cuffs. The standard cuff included with the device
is suitable for an upper arm circumference of 8.7" to 11.8"
(22 to 30 cm). The large cuff is suitable for an upper arm
circumference of 11.8" to 16.5" (30 to 42 cm).
Replacement cuffs from other models cannot be used with
this model. Doing so will result in inaccurate readings or
error messages.

6.2 Correct posture

• Rest at least for 5 minutes before each measurement.
Otherwise there may be erroneous results.
• You can perform the measurement either sitting or lying
down. Always make sure that the cuff is on a level with
your heart.
• In order not to distort the result, it is important to keep
still during the measurement and not talk. The most pre-
cise measurement results are obtained if you strive for a
relaxed measurement situation. You may close your eyes
and breathe calmly during the measurement.
• Please note that any muscle movement during inflation
or deflation can cause measurement error.
• To carry out a blood pressure measurement, make sure
you are sitting comfortably with your arms and back lean-
ing on something. Do not cross your legs. Place your feet
flat on the ground.

6.3 General Notes

• For reliable monitoring and reference of blood pressure,
keeping long-term records is recommended.
• To minimize measurement variations due to physical activity,
rest at least 5 minutes before measuring your blood pres-
sure (or 15 minutes after strenuous activity). You should not
be physically tired or exhausted while taking measurement.
• In order to obtain a resting condition blood pressure, avoid
eating, drinking alcohol and caffeinated beverages, smok-
ing, exercising, and bathing for at least 30 minutes before
taking a measurement.
• Stress raises blood pressure.
• Perform measurements in a quiet and relaxed environ-
ment at room temperature.
• Always wait at least 5 minutes between measurements
to allow the blood circulation in your arm to return to nor-
17