NOTICE:
• The blood pressure monitor is made up of precision elec-
tronic components. Accuracy of readings and the instru-
ment's service life depend on careful handling. Protect the
unit against hard knocks (e.g. dropping the unit), moisture,
water, dirt, dust, chemicals, extreme hot or cold tempera-
tures, major temperature fluctuations, direct exposure to sun-
light and heat sources which are too close (e.g. stoves, heat-
ing radiators). This may damage the unit. The device must be
stored in the specified ambient conditions. Please see sec-
tion "9. Care, maintenance and storing the instrument" and
section "12. Technical Specifications" for details.
• Do not use any aggressive solvents, cleaning agents, de-
tergents or any other strong chemicals to clean the device.
• Never immerse and or spill water or any other liquid onto
the monitor or any components, otherwise liquid will enter
it and cause damage.
• Do not wash the unit in a washing machine, dish washer
or tumble dryer.
• Observe the local regulations for material disposal. Dispose
of the device, components and optional accessories accord-
ing to applicable local regulations. Unlawful disposal may
cause environmental pollution.
• Batteries can contain toxins that are harmful to the environ-
ment. Always dispose of batteries in accordance with ap-
plicable local regulations. Do not dispose of batteries with
normal household waste.
• Always use the size and type of battery indicated. The use
of other batteries will damage the device.
• Never use different types of batteries, battery brands or bat-
teries with different capacities. This may damage the unit.
You should preferably use alkaline batteries.
• Never use rechargeable batteries. This may damage the unit.
• Always replace all batteries at the same time and use bat-
teries of the same type.
• Replace weak batteries before they discharge completely.
When
appears in the display please change the bat-
teries.
• Leaking batteries may damage the device. If you do not
intend to use the unit for longer periods, remove the bat-
teries from the battery compartment before placing the de-
vice in storage.
• Use only the original Beurer connection cable for data trans-
fer, otherwise you could damage your monitor or PC.
• Never attempt to repair, open and/or disassemble the unit
(including arm cuff and optional accessory) or adjust it your-
self. This may damage the unit and impair the functions. If
you need to have the unit repaired, please contact our cus-
tomer service. Please see warranty for service contact. Be-
fore submitting any complaint, first check the batteries and
replace them if necessary.
• Changes or modifications to the device will nullify the us-
er warranty.
• Do not drop or insert any object into any opening or tube.
This may damage the unit.
• Do not press the buttons with excessive force or with
pointed objects.
6