Mains Part; Electromagnetic Compatibility - Beurer BM 58 Manual De Instrucciones

Operating
Temperature 41 °F to 104 °F (+ 5 °C to + 40 °C),
and humidity ≤ 90 % relative humidity
Transport
and storage
Temperature - 4 °F to 131 °F(- 20 °C to + 55 °C),
and humidity ≤ 95 % relative humidity
Power Supply 4 x 1.5 V
LR6)
Battery Life for approx. 200 measurements, depending on
blood pressure level or inflation pressure
Accessories with storage pouch, instruction manual,
4 pcs "AA" battery LR6, standard and large
cuff, USB connection cable, AC adapter
Classification internal power supply, Type B applied part,
IPX0, no AP or APG, continuous operation
Auto shut-off approx. 1 minute after last button operation
These specifications are subject to change without notice
for purpose of improvement.

14. Mains part

Model No. FW 7575M/US/6/06
Input
100 – 240 V, 50 – 60 Hz
Output
6 V DC, 600 mA, only in connection with
beurer blood pressure monitor
AA batteries (alkaline type
Supplier Friwo Gerätebau GmbH
Protection
This device is double insulated and
protected against short circuit and
overload by a primary thermal fuse.
Make sure to take the batteries out of the
compartment before using the mains part.
Double insulated / equipment class 2
Polarity of the the DC voltage connec-
tion
Enclosures and Equipment enclosed to protect against con-
tact with live parts, and with parts which
Protective Covers
can become live (finger, pin, hook test).
The operator shall not contact the patient
and the output plug of mains part simulta-
neously.

ELECTROMAGNETIC COMPATIBILITY

Device fulfills the stipulations of the International Standard
IEC 60601-1-2
27