HomeMatic HmIP-DLD Manual De Instalacion Y Uso página 27

Operation
• Select the position in which the key
can be pulled out and the lock is
unlocked.
• Guide the device over the key and
push it completely onto the moun-
ting plate.
• Fasten the device using the two
screws that were screwed out in
the beginning.
• In the app, define on which side of
the door your device is installed if
you are looking at the door from
the inside.
• In the app, define in which position
the key can be pulled out.
• Also, define the number of turns
that are necessary in order to com-
pletely lock the door.
The device is fully mounted and the
pairing procedure is completed in the
app.
8 Operation
The door lock drive is operated via
the Homematic IP smartphone app,
via connected Homematic IP devices
(such as a key ring remote control) or
directly on the device using the "un-
lock" or "lock" buttons or the rotary
wheel. The device can also be cont-
rolled via voice control with Amazon
Alexa or Google Assistant.
Additional control options are available
in conjunction with the Smart Home
Central Control Unit CCU3 or third-
party solutions.
8.1 Operation via smartphone
With the Homematic IP smartphone
app the door lock drive can be con-
trolled and configured with up to 8
connected smartphones. You can also
operate up to 8 lock actuators with
one smartphone app.
8.1.1 Operating modes
Manual operation
In manual operation, the door lock
drive is only controlled after manual
operation by the user. After operati-
on, the device remains in its last status
(locked or unlocked). If the function
"open" has been selected, the device
remains in the status "unlocked".
The week program is switched off in
manual mode and the door is not au-
tomatically locked or unlocked during
this time.
27