8.3 Idle mode
To switch the Mobile Handheld Computer into idle mode, use the following button:
"On/Off" button (hold for two seconds).
In idle mode, (system) processes minimize their power consumption in order to save energy. The display is
also switched off. Therefore, the Mobile Handheld Computer requires only a little power and the
rechargeable battery time can be extended.
8.4 Emergency power supply
After the Mobile Handheld Computer has been switched on for at least 30 minutes, the emergency power
supply can be used.
Due to the emergency power supply, the Mobile Handheld Computer is also supplied with power for up to
ten seconds so that it is possible to change the rechargeable battery when the application is running.
The removal of the rechargeable battery is detected and a message is sent to the operating system. This
message can be used by the applications to save important data.
In the process, the display is darkened. After the rechargeable battery has been put back in, the display
becomes active again.
8.5 Keyboard/Keys
Type
Layout
Scanner buttons
M2SmartSE Set_Brief Overview_Resumen breve_Aperçu rapide_FCC_V1.01_en_es_fr
Keyboard
Side On/Off button, side scanner buttons
Side orange scanner buttons
15 / 92