Descargar Imprimir esta página

ACD GRUPPE M2Smart SE Set Guía Breve página 29

Ocultar thumbs Ver también para M2Smart SE Set:

Publicidad

Idiomas disponibles

Idiomas disponibles

13 Cleaning and Maintenance Information
Turn off the device before starting any cleaning or maintenance
process!
Make sure that the laser beam is switched off by checking the
laser beam exit!
Laser beam exit
Do not use any corrosive chemicals, cleaning solutions or strong
cleaning agents in order to clean the Mobile Handheld Computer,
battery and docking station.
ATTENTION
All components should be disposed of properly at the end of their
technical lifetime.
ATTENTION
Clean the Mobile Handheld Computer by setting it down on a surface (e.g. table). This way, you can hold it
securely and the Mobile Handheld Computer cannot slip out of your hands during the cleaning process.
13.1 Display
To clean the display, always switch the Mobile Handheld Computer off since the display reacts to being
touched and therefore the active program can be compromised or destroyed. Do not put a lot of pressure on
the display.
13.2 Window for scanner, camera, and camera lighting
In case of abnormalities during scanning, switch the Mobile Handheld Computer off and clean the scanner
pane with a soft-dry cloth. The scanner pane is very transparent and hardly visible with the naked eye.
Shape the cloth accordingly, so that it can be moved slightly back and forth in the scanner shaft. Do not put a
lot of pressure on the glass.
Make sure that the laser beam is switched off by checking the
laser beam exit!
Laser beam exit
M2SmartSE Set_Brief Overview_Resumen breve_Aperçu rapide_FCC_V1.01_en_es_fr
29 / 92

Publicidad

loading

Este manual también es adecuado para:

M2smart seDs2smart