Display; Charging And Communication Contacts; Scanner Window; Service And Spare Parts - ACD GRUPPE M260TE Set Instrucciones Breves

Clean the device when dirty and by placing it firmly onto a surface (e.g. table). This ensures a secure hold
and the device cannot slip out of your hand during the cleaning process.

4.1 Display

Clean the display with a soft, dry cloth. In order to do, always switch off the device as the display responds to
all contact and could therefore compromise or interfere with the active program. Do not apply any severe
pressure on the display.

4.2 Charging and Communication Contacts

If transfer problems occur, clean the charging and communication contacts with a soft, moist cloth.
When dealing with the DS260, the power plug must be disconnected beforehand.

4.3 Scanner window

In the event of any irregularities during scanning, switch off the device and clean the scanner window with a
soft, dry cloth. The scanner window is ultra-transparent and can hardly be seen with the naked eye. Carefully
clean the window without applying excess force on the glass.

5 Service and Spare Parts

Requests for Services and Spare parts should be directed to the following address:
ACD USA, Inc.
1001 Mittel Drive
IL 60191 Wood Dale
United States
Phone: +1 (630) 354-6844
E-Mail: sales@acd-group.com
Web: www.acd-group.com
Use Original Spare Parts Only.
M260TE_Brief Overview_Resumen breve_FCC_V1.11_en_es 15 / 35