Publicidad
Reverse sewing
GB
A
Removing the work
Cutting the thread
B
Reverse sewing is used for locking the end of seams and
where reinforcement is needed. At the end of seam, press
down the reverse sewing lever and touch the foot control
lightly. Sew a few reverse stitches. Release the lever and
the machine will sew forwards again (A).
Turn the handwheel towards you to bring the thread take
up lever to its highest position. Raise the presser foot and
draw the fabric away from you.
Hold the threads behind the presser foot. Using both hands,
guide them to the slit (B) at the rear of the presser bar and
press down to cut the thread. You can also use the thread
cutter on the side of the machine.
32
https://manual-hub.com/
Publicidad
