Publicidad
Twin needle
GB
0~2.5
1~4
A
- Turn stitch length dial to the desired stitch length.
- Turn stitch selector to straight stitch, center needle position,
width setting "0".
- Make sure that the two threads used to thread the twin needle
are of the same weight. You can use one or two colors.
- Insert the twin needle in the same way as single needle. Flat
side of needle should face away from you.
- Follow instructions for single needle threading. Thread each
needle separately.
Please note:
When sewing with twin needle, always proceed slowly, and make
sure to maintain a low speed to insure quality stitching.
When using twin needle on zig-zag make sure the stitch width dial
is set between "0" and "2.5". Do not use twin needle at setting
above "2.5".
https://manual-hub.com/
76
Publicidad
