Blind hem/ lingerie stitch
GB
a
3~5
b
1~2
c
d
F
E
* The blind hem foot is an optional accessory not supplied with
your machine.
For hems, curtains, trousers, skirts, etc.
Blind hem for stretch fabrics. Position "F" on selection dial.
Blind hem/ lingerie for firm fabrics. Position "E" on selection
dial.
Set the machine as illustrated.
Note:
It takes practice to sew blind hems. Always make a sewing test
first.
Fold the fabric as illustrated with the wrong side uppermost. (1)
Place the fabric under the foot. Turn the handwheel forwards by
hand until the needle swings fully to the left. It should just pierce
the fold of the fabric. If it does not, adjust the stitch width
accordingly. (2) Adjust the guide (3) by turning the knob (4) so
that the guide just rests against the fold. Sew slowly, by pressing
the foot control lightly guiding the fabric along the edge of the
guide.
a.
Stitch width
b.
d. Stitch pattern
4
3
https://manual-hub.com/
Stitch length
c. Presser foot
1
2
44