Publicidad
Free motion darning
GB
0
0
A
* The darning foot is an optional accessory not supplied with your
machine.
Set the machine as illustrated. Move the drop feed control to right
side to lower the feed dogs. (1)
Remove the presser foot clamp. (2)
Attach the darning foot to the presser foot bar. The lever (A)
should be behind the needle clamp screw (B). Press the darning
foot on firmly from behind with your index finger and tighten the
screw (C). (3)
First sew round the edge of the hole (to secure the threads). (4)
First row: Always work from left to right. Turn work by 1/4 and
oversew.
A darning ring is recommended for easier sewing and better
results.
1
2
https://manual-hub.com/
a
a
b b
b
C
66
A
B
4
3
Publicidad
