iZEEKER iG400 Manual Del Usuario página 11

B. External Power Supply (Optional)
The camera can be powered by an external DC power supply adapter (Not included).
DC adapter: 6V/2A (3.5 mm external and 1.35 mm internal diameter)
Note: Please do not remove the internal batteries when using an external power source.
After adjusting the settings in ON mode, you need to close the camera case and plug in
the external power cable. The camera will be automati cally switched to be powered by
the external power supply.
2. Insert and format the SD Card
•
Insert a Class 10 or higher class SD card up to 128GB (U3 recommend).
LOCK
•
Insert or remove the SD card when the camera is in "OFF" mode.
•
Write Protection
If you insert or remove the SD card in ON mode, the camera will shut
unlocked
itself down.
•
Format the new SD card before using the camera.
•
LOCK
If camera displays "Card protected", remove the memory card and
change the card Lock position.
Write Protection
locked
Plug the output end of the external power supply
into the DC-IN port.
Insert the SD card into the card slot (metal contacts
down) and push in until you hear a "click".
When the card is inserted, the mode switch
must be in OFF position.
Note:
7
EN