iZEEKER iG400 Manual Del Usuario página 14

4. Setting Menu
Switch to ON mode, Press【MENU】button to get into the setting menu.
•
EN
Monitor Delay: 30S/1MIN/3MIN. Default: 30S
Select the delay time when the camera enters the automatic shooting mode. In ON mode,
the camera will automatically go into the automatic shooting mode after the set delay time
if you do not make any operations.
•
Mode: Photo, Video, Photo+Video. Default: Photo
Select whether photos or videos should be taken when motion is detected. When in the
"Photo+Video" mode, the camera first takes a set number of photos prior to recording a
video.
•
Photo Resolution: 3MP/5MP/7MP/8MP/10MP/12MP/16MP/20MP/24M/30M/48M.
Default: 5MP
Set the size of the pictures taken.
Note: Higher resolution produces better quality images, but creates larger files that
take up more of the SD card capacity.
•
Photo Series: 1-3 Photos. Default: 1 photo
Set the number of pictures taken in Photo mode.
•
Video Resolution: 4K/2.7K/1080P(30FPS)/720P(30FPS)/VGA. Default: 4K
Set the size of the videos taken.
Note: Video recording will consume significantly more power than photo, especially
at night with IR LED on. Please set a shorter video length to ensure battery life. The power
consumption of 10 seconds video of recording is the same as 150 photos.
•
Cycle Storage: O /On. Default: O
If you turn on this function, the camera automatically overwrites the first file and stores
the latest captured file. when your memory card is full.
•
PIR Interval: 2s-60mins. Default: 30s
Set a lag time between one picture and the next, one video and the next, or pictures and
an video (when you choose picture+video mode).
10