iZEEKER iG400 Manual Del Usuario página 8

EN
Note: Shift the "Mode Switch" to choose working status
Mode Switch
Menu Button
Mode Button
Up Button
Down Button
OK Button
BUTTON INSTRUCTION
OFF Mode: Turn o the camera
The camera is completely o . Only in OFF mode should
you unplug the memory card or replace the batteries.
ON Mode: Adjust settings/Start operating
When switched from OFF to ON, the screen display will go
into the preview mode. You can manually record video, take
photos, playback the recorded files or change settings.
In the preview mode, the PIR sensor is on. When they are
triggered, light indicator will flash, but the camera will not
take photos or record videos automatically.
If there is no operation, it will automatically get into working
mode. There will be have a delay time and the screen will
have a 15s countdown, and then it will be blank, the button
operation will be disabled.
When detecting animals or other moving objects, the camera
will take photos or record videos when the PIR sensor is
triggered, then return to standby afterward.
Go into the menu/Return to the previous page
Change preview mode:
Photo mode/Video mode/Playback mode
Move up/Page forward
Move down/Page back
Confirm execution
4