iZEEKER iG400 Manual Del Usuario página 21

Problems
PIR interval is set too short
PIR sensitivity is set too high
The brightness of the IR light is set too high
Video length is set too long
Battery
power drains
The number of photos is set to 3 or 2
quickly
Take too many photos and
videos at night
Incorrect
Forgot your password
password
Camera does
Time-lapse function is turned on.
not record
The timer setting is turned on
automatically
The camera can be turned
Other questions on, but there are other
unusual problems
Note: If above information didn't help, please contact After-Service
E-mail: support@izeeker.co
Possible Causes
17
Solutions
• Increase the PIR interval.
• Turn down the PIR sensitivity.
• Turn down the IR light brightness.
• Set a shorter video length, like 5s.
• Set the number of pictures to be less,
such as 1.
• If you use the camera mostly at night,
you can adjust parameters according
to the above suggestions.
• Use an external power supply to
power the device.
• Input the generic password "1111"
to enter the camera, set a new
password, or turn o the password.
• Turn o time-lapse or timer.
• If you do not know the settings, you
can restore the camera to the
default settings and restart. See the
manual (Bullet point 4 "Setting
Menu").
Try the following way:
• Install new batteries.
• Use a new SD card and format it on
the camera.
• Restore the camera to default
settings and restart.
EN