Fronius MHP 280i G PM Manual De Instrucciones página 63

Every time the
Every time the wirespool/basket-type spool is changed:
wirespool/
-
basket-type
-
spool is changed
1
Recognising
1.
faulty wearing
parts
1.
2.
3.
4.
5.
Clean wirefeeding hose with reduced compressed air
Recommended: replace the inner liner. Clean the wearing parts before fitting
the new inner liner
2.
Insulating parts
- Burned-off outside edges, notches
Nozzle fittings
- Burned-off outside edges, notches
- Heavily covered in welding spatter
Spatter guard
- Burned-off outside edges, notches
Contact tips
- Worn-out (oval) wire entry and wire exit holes
- Heavily covered in welding spatter
- Penetration on the tip of the contact tip
Gas nozzles
- Heavily covered in welding spatter
- Burned-off outside edges
- Notches
2
3.
English
4. 5.
63