Medivon KTR-2610 Manual Del Usuario página 21

7. Method of application
7.1 Power supply operation
1) Charging of lithium battery by connecting to the device
through the adapter.
2) Connect the components
According to Fig 1, connect
the main unit and electrode
pads with the electrode wires.
3) Turn on/off
Press the "on/off" key can turn
on the main unit, the power light is lightened, the working
routine is started and the LCD backlight of remote control is
lightened.
Press the "On/Off" button again, the machine shut down and
the screen is off.
7.2 Functional operation
1) Attach the electrode pads to the stimulate parts, if there is a
perspiration in your body, it must be clean to use.
2) Press the "on/off" key can turn on the main unit. The device
would be default mode of TENS, there are 20 fixed programs.
3) The use of the key "∧","∨" of program selection:
"∧" key as an option to Up select; "∨" key as an option to
Down select
4) The use of the key "+", "-" of intensity adjustment for
channel 1 and channel 2.
Each channel has 0-16 levels.
"+" can enhance intensity;
"-" can decrease intensity.
5) Mode switch
Short press "F" key to switch three major modes of TENS,
EMS, and FITNESS;
6) The adjustment of timing
Long press "F" key for 1.5 seconds to set up the stimulation
time of 15 minute, 30 minute, and 45 minute;
7) There are 20 fixed programs for TENS, 20 fixed programs
for EMS and 10 fixed programs for FITNESS.
8) The output frequency of the product is displayed on the
LCD.