safety devices, remove drip collecting drawer and
control panel.
Heating elements
– Pull out the control knobs and remove control
panel. Disconnect and replace the faulty heating
element.
Regulation thermostat
– Pull out the control knobs. Remove the front
control panel. Remove the thermostat and
disconnect it. Extract the bulb (thermostat) from
its seat. Change the faulty component.
Safety thermostat
– Pull out the control knobs. Remove the front
control panel. Remove the thermostat and
disconnect it. Extract the bulb (thermostat) from
its seat. Change the faulty component.
USE AND MAINTENANCE
WARNINGS
Caution , appliance with hot surfaces!
The appliance is for professional use and must be
used by trained personnel. The appliance has to be
used only for direct cooking of food, laying the food
to be cooked (meat, hamburger, fish, vegetables,
etc.) directly on the hot surface of the plate. Any
other use of the appliance is considered improper.
It is absolutely forbidden to use the plate for
indirect cooking of food, laying pots casseroles
or pans containing food on the plate.
The installation and adaptation to other voltage
must be done by qualified and authorized installers.
In case of breakdown disconnect the main switch.
Sealed components must not be tampered with.
For repairs consult only authorized service centres
and ask for original spare parts only.
The manufacturer declines any responsability
if such obligations are not observed.
Carefully read this booklet and keep it in a safe place.
Before using the appliance carefully clean all the
surfaces that will come in contact with food.
Safety devices
The appliance is equipped with an additional
manually-reset safety thermostat which
automatically cuts off the electrical supply to the
heating elements when the temperature of the
plate exceeds the maximum working temperature
(operating thermostat faulty). If this should occur,
disconnect the appliance from the mains electrical
supply and contact your nearest customer service
centre.
Operation
To switch on heating of cooking plate (green and
orange pilot lamps on) turn the thermostat knob
on the desired working position.
0
off
12/31
Electric heated Fry-Tops (600)
USE
°
50
C
minimum temperature
÷
°
100
200
C intermediate temperatures
°
300
C
maximum temperature
Switching off heating
– Turn thermostat knob on position 0.
CLEANING AND MAINTENANCE
– Before any cleaning operation disconnect the
electrical supply (if present).
– Clean stainless steel surfaces daily with water
and non abrasive common detergents, rinse and
dry thoroughly.
– Do not use iron scouring pads or chlorate
products.
– Never use sharp tools to handle the food during
cooking or to clean the chromed radiant plate,
as these may damage or ruin the finished surface.
– Do not use sharp objects which can scratch and
ruin the steel surface.
– Do not use corrosive products to clean the floor
under the appliance.
– Do not wash the appliance with water jets.
– Before a long period of inactivity disconnect the
main switch. Proceed to its thorough cleaning.
– At least twice a year, ask for the intervention of
an authorized technician authorized for checking
the appliance. It is advisable in any case to
stipulate a maintenance contract.
Cleaning chromed radiant plate
– Never use abrasive materials or detergents.
– Never use chemical agents (e.g. oven cleaner).
– The plate should be kept clean at all times and
any food residue left on the surface must always
be removed immediately after use. This type of
encrustation can be removed more easily when
the plate reaches a temperature of 140°C,
pouring over ice flakes or cubes and easing off
the residue with the help of a suitable scraper.
– Once the plate has cooled down (to 80-100°C),
wipe over the surface with a cloth soaked in
water or vinegar.
– Once the plate has cooled completely, clean the
surface with a non-scratch cleaning cream/fluid
to bring back its original shine.
– Rinse and wipe over the plate with a damp
cloth. Dry.
LIST OF PARTS SUBJECT TO CHANGE
– Heating element for cooking plate
– Cooking plate
– Thermostat
– Safety thermostat
– Knob for thermostat
– Knob for safety thermostat
– Pilot lamps
– Switch