Before the first use
Clean all parts as described in "Cleaning and Care".
Unpacking
To unpack the appliance, proceed as below:
Take the appliance out of the carton.
•
Remove all pieces of the packaging.
•
Remove any possibly extant labels on the coffee grinder (do not remove the rating plate).
•
Requirements for the installation location
For safe and flawless operation of the appliance, the place of location must meet these prerequisites:
The appliance must be set up on a firm, flat, level, non-slip and heat resistant base that has sufficient
•
load bearing capacity.
Select the place of location so that children cannot reach the surfaces of the appliance.
•
The appliance is not intended for installation in a wall or a built-in cupboard.
•
Do not set up the appliance in a hot, wet or moist environment.
•
The electric socket must be readily accessible so that the power cord can be easily unplugged.
•
Operating and speed settings
Maximum operating time is 4 minutes. After these 4 minutes please let the appliance cool down to
•
room temperature and start again.
Grind setting
You can influence the composition of the coffee with various grind settings.
The wide range of grind settings allows you to make a precise adjustment.
EN
13