Busch+Müller Briq-S E Instrucciones De Uso página 9

Assembly and instruction manual for Busch+Müller headlights
Briq-S E and Briq-S E T Senso for bicycles with pedal assist (fast e-bikes),
not approved for vehicles requiring a registration plate
1. General information
These instructions are directed at persons with knowledge and experience in the assembly of bicycle
components. Specialist tools may be required. Should you not have such experience or the required
tools please enlist the service of a cycle specialist to ensure that this assembly is carried out correctly.
Improper assembly may result in a fall or crash resulting in serious injury. Please read these instruc-
tions thoroughly and retain them for future reference.
Busch + Müller produce an extensive product range of bicycle light components. Not every light
component is suitable for every ground surface type. Should you be unsure about which type of light
component you require for your intended use, you may either contact our service-hotline under +49
2354 915 7111, or by E-mail to service@bumm.de or request advice from a specialist retailer.
16
2. Packaging content
Headlight Briq-S E or Briq-S E T Senso | Busch+Müller bracket | front reflector | Assembly and
Instruction Manual
3. Safety information
These instructions implement signal words to highlight potential dangers or important informa-
tion.
The meaning of these signal words is as follows:
WARNING Describes a hazardous situation which, if not avoided, could result in a fatal
accident or serious injury.
NOTE Indicates information considered important, but not hazard-related (e.g. information
related to property damage).
The ! symbol is used to provide other useful information about your new bicycle component.
NOTE Light components from Busch + Müller are suited to riding conditions on a firm riding
surface. Avoid use under extreme circumstances and never ride down steps. Do not use B+M light
components while performing jumps, stunts, tricks, hops or fast descents on uneven terrain.
17