LIVARNO LUX LSLR 16 A1 Manual De Instrucciones página 26

LIVARNO LUX LSLR 16 A1
5. Copyright
All the contents of this user manual are protected by copyright and provided to the reader for information
only. Copying data and information without the prior explicit written consent of the author is strictly
forbidden. This also applies to any commercial use of the contents and information. All texts and diagrams
are up-to-date as of the date of printing. Subject to change without notice.
6. Before you start
Remove the LED emitter and fitting materials from the packaging.
Check the LED emitter for damage. If the LED emitter is damaged, do not use it.
If the delivery is damaged or incomplete, please contact the manufacturer's customer services.
6.1 The right place for mounting
Select a location carefully and prepare well before mounting.
 Arrange all the individual parts, tools required and fittings tidily so everything is ready to hand.
 The LED emitter must only be mounted on stable surfaces such as walls.
 The power supply must be via the building's electrical circuit.
 Do not mount the LED emitter above a heat source or in the immediate vicinity of other light sources.
When choosing the right place for mounting, please also note the illustrations [D and E] on the cover
page.
 Select the location so that the LED emitter is protected against wind, rain and dirt.
 Make sure that the 180° rotation range of the light head is completely clear.
 Find out in advance what fittings are suitable for the location you have chosen. Suitable fittings for
mounting on concrete are provided.
6.2 Tools required
The following tools are not supplied. This list is a guide only. The actual tools you will require depend on
the individual location.
 Ladder
 Voltage tester
 Spirit level, folding rule, pencil
 Drill and drill bits
 Phillips screwdriver, flat screwdriver
 Open-jawed spanner, combination pliers, wire cutters
24 - English