LIVARNO LUX LSLR 16 A1 Manual De Instrucciones página 28

LIVARNO LUX LSLR 16 A1
6.4 Mounting
The LED emitter must be wall-mounted.
Disconnect the power supply.
Undo the mounting plate (7) from the LED
emitter by removing the screw (6) using a
Phillips screwdriver.
Now press the unlock button (8) on the
mounting plate (7) and pull the mounting plate
(7) on the strap out of the housing of the LED
emitter.
Drill through the pre-punched mounting holes
and then draw the position of the drill holes on
the wall in order to drill holes in the wall.
Fit the rawlplugs (13) into the drilled holes.
26 - English