ISX
5. CLAGE app "Smart Control"
EN
Flow Limit: Setting of flow rate limitation.
Setting options:
"OFF"
no flow rate limitation (motor valve deactivated)
"AUTO"
automatic adjustment, i.e. flow rate is limited in a way so that the selected
outlet temperature is reached
e.g. "9.0" limitation to a freely selectable value between 4.5 and 14 l/min
Temperature Limit: The temperature limit can be activated / deactivated in this menu
and the maximum outlet temperature can be limited to a desired value within the tem-
perature setting range by tapping on
Note: If the instantaneous water heater supplies a shower, then the maximum tem-
perature was limited to 55 °C during the installation of the appliance and the function
was disabled.
Operation Lock: Secure your settings with a four-digit PIN.
Note: The operation lock can only be deactivated with the correct PIN under
"Protected Sections" or under "Delete PIN". If you should forget your PIN, please
contact after-sales Services.
Enter PIN: Numbers from 0 to 9 can be selected via the keypad. If you have selected
four digits, confirm by tapping on "OK". The PIN must then be entered again and con-
firmed for security reasons.
If both entries match, you access the section "Protected Sections".
Protected Sections: Select the areas for a PIN lock.
• Lock Settings: Automatically active as soon as a password has been generated.
Users can only access the settings menu with a PIN. Deactivating it deletes the cur-
rent PIN.
• + Lock Main Menu: Users can only access the main menu with a PIN
• + Lock Temperature: The outlet temperature is set to the current value and can only
be changed with a PIN. User profiles, applications and Eco mode can also only be
changed with a PIN.
Synchronize Statistics: Use this function to reload the statistical data.
Currency: Select a currency symbol.
Electricity Tariff (€/kWh): Indicate the electricity price from your electricity company.
Water Tariff (€/m³): Indicate the water price from your water company.
Language: Select the menu language.
52
or .