Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
CLAGE
6. Initial operation
Shower application
The water heater's temperature must be limited to 55 °C, if it is connected to a show-
er.
EN
1. Press and hold
and
for two seconds and open the service menu.
2. Navigate to the item "
" by tapping
or
.
S L
3. Press and hold
until the countdown has counted down to zero to activate the
shower function.
When the appliance is operated with preheated water, it must be ensured that this
temperature is limited to 55 °C as well.
Note: The function can only be deactivated by a specialist via a new start-up. This may
only be done if a shower is no longer connected. All settings and statistical data will
be lost.
65
Publicidad
Tabla de contenido
