USE
WARNING!
On some points of the machine there are some adhesive plates indicating:
– DANGER
– WARNING
– CAUTION
– CONSULTATION
While reading this Manual, the operator must pay particular attention to the symbols shown on the plates (see Visible Symbols On
The Machine paragraph).
Do not cover these plates for any reason and immediately replace them if damaged.
BATTERY CHECK/SETTING ON A NEW MACHINE
WARNING!
The electric components of the machine can be seriously damaged if the battery is either improperly installed
or connected. The battery must be installed by qualified personnel only. Check the battery for damage before
installation.
Handle the battery with great care.
The machine requires one 24V battery.
The machine can be supplied in one of the following modes:
Li-ion battery already installed on the machine
1.
Turn the function selection knob (31) on one of the programs to turn on the machine. If the green/yellow warning light (37)
turns on,the batteries are ready to be used.
2.
If the red warning light turns on, the battery must be charged (see the procedure in Maintenance chapter).
Replace battery
1.
Buy appropriate battery (see the Technical Data paragraph).
For battery choice and installation, apply to qualified battery Retailers.
2.
Replace the battery (see the following paragraph).
3.
Charge the battery (see the procedure in Maintenance chapter).
INSTRUCTIONS FOR USE
10
ENGLISH