AENO SM2 Guia De Inicio Rapido página 11

Number of
LED lights
Two
Three
Power button functions
Action
Press and hold for 2
seconds
Press once
Preparing for first use
1. Open the package and carefully remove the device and accessories.
2. Remove any packaging materials.
3. Pull out the water tank plug.
4. Fill the tank with purified water using a measuring cup.
5. Insert the plug firmly into the tank.
6. Give the device a test run (see the "Test run" section).
Note. A test run is conducted before first use, as well as after a long storage, to
clean the device. No additional accessories need to be attached.
Test run
1. Hold the mop vertically over a container that has a heat resistance of at least
+100 °C (for instance, a sink) (Fig. C).
2. Let the device heat up:
 Insert the electric plug into a socket.
aeno.com/documents
State Description
Blinking Medium mode selected, heating up
Solid Steam release started in medium mode
Blinking Maximum mode selected, heating up
Solid Steam release started in maximum mode
Off The device is not plugged in or is switched
off
Description
Switches the device on and starts the heat-up
process; switches the device off
Switches steam modes
11