AENO SM2 Guia De Inicio Rapido página 13

Illustration
3. Attach the accessories in either of the ways suggested below:
 The mop head and jet nozzle are attached to the mop's steam nozzle
(Fig. D).
 The brushes and squeegee tool, to the jet nozzle that, in its turn, has been
attached to the steam nozzle (Fig. E).
4. Let the device heat up (see Step 2 in the "Test run" section).
5. When the device heats up, press the power button to start steam release.
Note. By default, the mop is set to medium steam mode every time it is turned
on. You can switch modes with a single press of the power button.
6. Hot-steam the desired surface.
ATTENTION! Do not direct the steam at yourself, other people, animals, plants,
and electrical appliances or electric sockets.
Note. Do not let the device run on an empty water tank. Add water into the
tank after making sure to turn off the device and pull the electric plug out of
the socket.
7. When finished, press and hold the power button: you will hear a sound, and
the indicator lights will go out. The device will turn off.
8. Pull the electric plug out of the socket.
aeno.com/documents
Name
Brass wire
brush
Crevice tool
Squeegee tool
Intended use
Removing particularly stubborn stains
(burnt residue, caked-on grease, scale,
etc.) by applying physical action. Suitable
for cleaning damage-resistant metal
surfaces (grills, ovens, barbecues, grates,
etc.)
Cleaning tile joints
Cleaning glass and mirror surfaces
13