Publicidad
ASSEMBLY
Battery Installation
The machine is equipped either with batteries in serial connection or elements of
DIN-type assembled together and connected in series, placed in its the battery
compartment under the recovery tank and must be handled using suitable lifting
equipment (due to weight, considering the type of batteries chosen, and coupling
system).
The batteries must be in accordance with CEI 21-5 Norms.
For batteries installation proceed as follows:
1. Take off the squeegee hose (1).
2. Take off the suction cover (2) after turning the locking levers (3).
3. Lift the recovery tank by rotating it and prop it open with the bar (4).
4. Place the batteries in the battery compartment.
5. Connect the terminals, respecting the polarities, avoiding contact with other
parts that could create short circuit.
6. Reassemble all parts.
Check Setting Of The Check Card On The Display (1).
In case GEL batteries are installed, it is necessary to set the battery check card.
Please contact the authorized technical assistance.
The machine and its battery check card are set for the use of
traditional lead batteries.
10
Publicidad
