Publicidad
ASSEMBLY
The Bending Is Not Uniform
Adjust the squeegee inclination rotating counterclockwise the wing nut (5) to
increase the bending in the central part, or clockwise to increase the bending on the
extremities.
Height adjustment
Once that the pressure and inclination of the squeegee has been adjusted, it is
necessary to fix this optimum condition making touch slightly the wheels onto the
floor. Rotate counterclockwise the registers (6) to lower the wheels or clockwise to
raise them. Both wheels must be adjusted in the same measure.
A label placed near the two registers (6) indicates rotation sense to increase or
reduce the height.
Pad Assembly
To assemble the pad to the machine proceed as follows:
Move the pedal (13) to lift the base.
Position the pad under the base and then lower it with the lever (13).
14
Publicidad
