Publicidad
FAULT DIAGNOSIS
The Base Motor Does Not Work
1. Verify that the key switch (8) is in the correct position. Switch the machine off
and on again.
2. Check the charge level of the batteries.
3. Check that the battery connector is correctly plugged in.
4. Verify that the switch (5) is on.
5. Act upon the drive control levers (9).
If the problem persists, please contact the authorized technical assistance.
The Traction Motor Does Not Work
1. Switch the machine off and on again.
2. Release the brake (10) until the signal lamp (3) goes off.
3. Press the drive control levers.
If the problem persists, please contact the authorized technical assistance.
32
Publicidad
