Installing The Mattress System - Invacare SoftCloud Ace Manual Del Usuario

SoftCloud™ Ace, SoftCloud™ Pro
WARNING!
This mattress is recommended to be installed
on medical bed frames of an appropriate size
with bed sides or assist rails, to accommodate
the mattress. It is preferred that the rails to be
in the raised position whenever the patient is
on the bed. Health care professionals assigned
to each case should make the final decision as
to whether side assist rails are warranted after
assessing patient risk of entrapment.
Controls on the footboard may be obstructed by
the control unit on a few bed frames. It may be
necessary to relocate the control unit.
– Before placing the patient on the bed, check
that connector and power cord are clear of
moving bed components.
– Operate all bed frame motorized functions
through their full range of motion to be
certain that there is no pulling, interference
or pinching.
– Take care when positioning connector and
cables to eliminate the risk of tripping hazards
or strangulation.
12
IMPORTANT!
Inappropriate handling can damage the mattress
cover.
– It is recommended that two people lift/carry
mattresses.
– Avoid contact with jewellery, nails, abrasive
surfaces etc.
– Do not drag mattresses.
– Avoid contact with wall, door frames, door
catches or locks etc.
– Do not transport in roll cages unless completely
protected from the sharp edges of the cage.

4.2 Installing the mattress system

It is recommended that all packing materials and instructions
be kept in the carry bag provided in the event the product
has to be shipped to an approved Invacare Service Center.
The mattress is treated as the applied part. Carefully remove
the Control Unit, Mattress and accessories from the shipping
cartons. Inspect all items for any damage that may have
occurred during shipping. Any damaged or missing parts
must be reported to an Invacare Service Center immediately.
1. Remove all packaging before use.
2. Place the mattress directly on the frame of the
bed.
The mattress is designed for beds with adjustable
lying surface.
1630732-A