Invacare SoftCloud Ace Manual Del Usuario página 13

1. Remove all covers, sheets and mattress from the bed.
CAUTION!
Risk of injury or damage
– Prior to attaching the control unit to the foot
board of the bed, check that the bed end is
robust enough or that the unit is placed on an
even enough surface to support the control
unit safely without risk to the carer or patient
or damage to the product itself.
IMPORTANT
– Prior to activation ensure the CPR valve (4
plugs) located near the head end of the
mattress is fully engaged and that the rapid
release handle is firmly connected to the
control unit.
2. On a standard bed, position the Mattress on top of bed
frame, top cover facing upwards and air hoses at foot
of bed for control unit positioning.
3. Attach to the bed by securing the two (2) adjustable
straps under each end of the bed. Ensure buckles are
securely fastened and straps are pulled tight.
Or on a profiling bed:
4. Secure the adjustable straps around the moveable
sections of the bed frame.
1630732-A
IMPORTANT!
Risk of damage to the mattress
– Ensure there are no sharp objects which may
come into contact with the mattress system.
– Check that the attachment of the Mattress
does not interfere with the movement or
operation of the bed.
– Do not secure straps to bed side rails as straps
will tear.
– Ensure that the positioning of the system does
not interfere with the ability to disconnect the
electrical power.
Setup
13