Silvercrest SSMW 750 D2 Manual Del Usuario página 29

Cleaning and storage
m WARNING! Risk of
injury! Disconnect the
product from the power supply
before cleaning work and
when not in use .
Do not store the hot product
in a cupboard or in the
packaging .
Do not pull the power plug out
of the electrical outlet by the
power cord .
Protect the product, its power
cord and power plug against
dust, direct sunlight, dripping
and splashing water .
Store the product in a cool,
dry place, protected from
moisture and out of the reach
of children .
Protect the product against
heat . Do not place the product
close to open flames or heat
sources such as stoves or
heating appliances .
˜ First use
Remove the packaging . Check if all parts are
complete .
During production, some parts are covered
with a thin oil film for their protection .
Before first use, operate the product without
any food so that any potential residues
evaporate .
Clean the product and its accessories
(see "Cleaning and care") .
NOTES:
The first few times the product is heated up, a
faint odour may be present . Ensure sufficient
ventilation in the area .
Discard the first set of grilled or baked food .
˜ Assembly
WARNING! Risk of electric
m
shock! Before installing/removing the
plates , , : Disconnect the power
[ 11 ] [ 12 ] [ 13 ]
plug from the wall outlet .
4 ] [
CAUTION! Hot surface! Do not change/
remove the plates
11 ] [
operation . Let the product cool first .
Installing the plates
Open the lock . Open the product .
1 ] [
Place the inner catch
into the large hook catches
Push down the plate until it clicks in place .
Repeat on the other side of the product .
NOTE: Install only plates of the same type .
, , right after
12 ] [ 13 ] [
of the chosen plate
10 ] [
.
7 ] [
GB/IE 27