Beta 3068 Instrucciones página 8

INSTRUCTIONS FOR USE ISTRUZIONI PER L'USO
ADJUSTMENT AND OPERATION
Adjustment
• Position the control lever in position (3) (Figure 5).
• Loosen the nut (g) (Figure 4).
• Adjust the screw (h) (Figure 4) starting to pump using the handle until the pump starts to lift the pallet truck, tautening the chain.
• When the chain is taut, complete the adjustment by tightening the nut (g) (Figure 4) that blocks the screw (h) (Figure 4).
Operation
• Move the control lever to position (1) (Figure 5), to lower the forks.
• Move the control lever to the neutral position (2) (Figure 5), to stop the forks from working.
• Move the lever to position (3) (Figure 5), and pump using the handle, to raise the body of the pallet truck.
WARNING! Observe the Load Capacity Diagram described in the technical data table.
PRODUCT SPECIFICATIONS
Capacity (Kg.)
Maximum lifting height (mm)
Height of the lowered fork (mm)
Height with handle (mm)
Length of the fork (mm)
Width of the fork (mm)
Diameter of the steering wheel (mm)
Diameter of the fork's wheel (mm)
Noise level (dB)
Weight (Kg)
8
Figure 4
Figure 5
Art. 3068 Art. 3069
2500
200
85
431,5
1150
540
Ø 200 Ø 200
Ø 80
< 70
72
2500
200
85
431,5
800
540
Ø 80
< 70
62
EN I