Publicidad
Idiomas disponibles
Idiomas disponibles
EN
58
Clean the air filter
•
Use a vacuum cleaner or water
to rinse the filter.
•
If the filter is very dirty (for
example, with greasy dirt), clean
it with warm water (below 45 °C)
with mild detergent dissolved in.
•
Then put the filter in the shade
to dry in the air, before you
insert it back into the appliance.
Mount the filter
1.
Reinstall the dried filter in reverse
order of removal.
Check before using
1.
Check whether all the air inlets and outlets of the units are unblocked.
2.
Check whether there is blocking in the water outlet of the drain pipe, and
immediately clean it up if any.
3.
Check the ground wire is reliably grounded.
4.
Check whether the remote controller batteries are installed, and whether the
power is sufficient.
5.
Check whether there is damage in the mounting bracket of the outdoor unit,
and if any, please contact costumer service.
Maintain after using
1.
Cut off the power source of the air conditioner, turn off the main power switch
and remove the batteries from the remote controller.
2.
Clean the filter and the unit body.
3.
Remove the dust and debris from the outdoor unit.
4.
Check whether there is damage in the mounting bracket of the outdoor unit,
and if any, please contact our local service center.
2.
Then cover and lock the panel.
Publicidad
