Klarstein BALI BREEZE SMART Manual Del Usuario página 62

EN
60
Problem
The wind blows out,
but the cooling/
heating effect is not
good.
The indoor unit
blows out odour.
There is sound
of running water
during the running
of air conditioner.
A slight "click" sound
is heard when the
air conditioner is
switched on or off.
Possible Cause
Excessive accumulation
of dust on filter, blocking
at air inlet and outlet, and
the excessively small angle
of the louver blades all
will affect the cooling and
heating effect.
Poor cooling and heating
effect caused by doors and
windows opening, and
unclosed exhaust fan.
Auxiliary heating function
is not turned on while
heating, which may lead to
poor heating effect.
Mode setting is incorrect,
and the temperature and
wind speed settings are
not appropriate.
The air conditioner
itself does not have
undesirable odour. If there
is odour, it may be due to
accumulation of the odour
in the environment.
When the air conditioner is
started up or stopped, or
the compressor is started
up or stopped during the
running, sometimes the
"hissing" sound of running
water can be heard.
Due to temperature
changes, panel and other
parts will swell, causing
the sound of friction.
Solution
Please clean the filter,
remove the obstacles at
the air inlet and outlet
and regulate the angle
of the louver blades.
Please close the doors,
windows, the exhaust
fan, etc.
Turn on the auxiliary
heating function (only
for models with auxiliary
heating function).
Please re-select
the mode, and set
the appropriate
temperature and wind
speed.
Clean the air filter or
activate the cleaning
function.
This is the sound of the
flow of the refrigerant,
not a malfunction.
This is normal, not a
fault.