Whirlpool AKZ9S 8271 IX Manual Del Propietário página 5

DAILY USE
1. SELECT A FUNCTION
Press to switch on the oven: the display will show
the last running main function or the main menu.
The functions can be selected by pressing the icon for
one of the main functions or by scrolling through a
menu: To select an item from a menu (the display will
show the first available item), press
the desired one, then press
2. SET THE FUNCTION
After having selected the function you require, you
can change its settings. The display will show the
settings that can be changed in sequence. Pressing
allows you to change the previous setting again.
TEMPERATURE / GRILL LEVEL / STEAM LEVEL
TEMPERATURE
When the value flashes on the display, press
change it, then press
the settings that follow (if possible).
In the same way, it is possible to set the grill level:
There are three defined power levels for grilling: 3
(high), 2 (mid), 1 (low).
In "Forced Air + Steam" function, you can select the
amount of steam from the following values: STEAM 1,
STEAM 2.
Please note: Once the function has been activated, the
temperature/grill level can be changed using
DURATION
DURATION
When the icon flashes on the display, press
to set the cooking time you require and then press
to confirm. You do not have to set the cooking time
if you want to manage cooking manually (untimed):
Press or to confirm and start the function. By
selecting this mode, you cannot program a delayed
start.
Please note: You can adjust the cooking time that has been
set during cooking by pressing
it and then press to con rm.
END TIME START DELAY
In many functions, once you have set a cooking time
you can delay starting the function by programming
its end time. The display shows the end time while
the icon flashes.
END TIME
Press or to set the time you want cooking to end,
or to select
to confirm.
to confirm and continue with
or
: press or to amend
then press
Place the food in the oven and close the door: The
function will start automatically after the period of
time that has been calculated in order for cooking to
finish at the time you have set.
Please note: Programming a delayed cooking start time will
disable the oven preheating phase: The oven will reach the
temperature you require gradually, meaning that cooking
times will be slightly longer than those listed in the cooking
table. During the waiting time, you can press
amend the programmed end time or press
other settings. By pressing
information, it is possible to switch between end time and
duration.
. 6 SENSE
th
These functions automatically select the best cooking
mode, temperature and duration to cook, roast or
bake all the dishes available.
When required, simply indicate the characteristic of
or to
food to obtain an optimal result.
WEIGHT / HEIGHT / PIZZA ROUND TRAY LAYERS
KILOGRAMS
To set the function correctly, follow the indications on
the display, when prompted, and press
the required value then press
DONENESS / BROWNING
.
In some 6th Sense functions it is possible to adjust
the doneness level.
DONENESS
or
When prompted, press
level between rare (-1) and well done (+1). Press
to confirm and start the function.
In the same way, where allowed, in some 6th Sense
functions, it's possible to adjust the browning level
between low (-1) and high (1).
. COOKING WITH STEAM
By selecting the "Forced Air + Steam" or one of the
several 6 Sense dedicated recipes it is possible cook
th
any kind of food thanks to the use of the steam.
Steam spreads more quickly and more evenly
through food compared to just the hot air typical of
Conventional Functions: this reduce cooking times,
locking in food's precious nutrients and ensuring you
obtain excellent, truly delicious results with all your
recipes. Through the complete duration of the steam
cooking the door must be kept closed.
To proceed with steam cooking, it will be necessary
to provide water to the boiler located inside the oven
using the extractable drawer on the control panel.
to confirm and activate the function.
, in order to visualize
to confirm.
or to select the desired
or to
to change
or to set
or