Publicidad
Idiomas disponibles
Idiomas disponibles
Direct current (DC)
Hilti Li-ion battery type series used. Observe the information given in the section headed Intend-
ed use
Pendulum locked (laser beam inclined)
Pendulum unlocked (self-leveling system active)
1.4
Sticker on the product
Laser information
LASER RADIATION! DO NOT LOOK INTO THE LASER BEAM! LASER CLASS 2 PRODUCT.
Laser class 2 based on standard IEC60825-1 / EN60825-1:2014 and compliant with CFR
21 § 1040 (Laser Notice 56).
1.5
Product information
products are designed for professional users and only trained, authorized personnel are
permitted to operate, service and maintain the products. This personnel must be specifically informed about
the possible hazards. The product and its ancillary equipment can present hazards if used incorrectly by
untrained personnel or if used not in accordance with the intended use.
The type designation and serial number are printed on the rating plate.
▶ Write down the serial number in the table below. You will be required to state the product details when
contacting Hilti Service or your local Hilti organization to inquire about the product.
Product information
Multi-line laser
Generation
Serial no.
1.6
Declaration of conformity
The manufacturer declares, on his sole responsibility, that the product described here complies with the
applicable legislation and standards.
The technical documentation is filed here:
Hilti Entwicklungsgesellschaft mbH | Tool Certification | Hiltistrasse 6 | D-86916 Kaufering, Germany
2
Safety
2.1
General safety instructions, measuring tools
WARNING! Read all safety precautions and other instructions. Measuring tools can present hazards
if handled incorrectly. Failure to observe the safety instructions and other instructions can result in damage
to the measuring tool and/or serious injury.
Keep all safety precautions and instructions for future reference.
Work area safety
▶ Keep your workplace clean and well lit. Cluttered or poorly lit workplaces invite accidents.
▶ Do not operate the product in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust.
▶ Keep children and other persons clear when the product is in use.
▶ Use the product only within its specified limits.
▶ Comply with your national accident prevention regulations.
Electrical safety
▶ Do not expose the product to rain or moisture. Penetrating moisture can cause short circuits, electrical
shock, burns or explosions.
▶ Although the product is protected against the entry of moisture, it should be wiped dry before
being put away in its transport container.
*2394965*
2394965
PM 50MG-22
01
English
23
Publicidad
