Hilti PM 50MG-22 Manual De Instrucciones Original página 32

Status
All LEDs show in sequence, followed by one (1)
LED quick-flashing yellow.
All LEDs show in sequence, followed by one (1)
LED showing constantly red.
4 Technical data
4.1 Product information
Range of the lines and intersection point without laser receiver
Range, lines and intersection point with laser receiver
Self-leveling time (typical)
Self-leveling range (typical)
Accuracy
Line width (typical)
Laser class
Battery life (typical, all lines on)
Battery life (typical, only horizontal or vertical
lines on)
Automatic power-off (activated after)
Degree of protection (Does not apply for Nuron B 22 battery)
Tripod thread
Beam divergence
Average output power (P
power)
Wavelength (λ)
Pulse duration (tp)
Pulse frequency (f)
Weight in accordance with EPTA procedure 01, without battery
Dimensions (Length x width x height)
Operating status indicator
28 English
= accessible emission laser output
AE
Meaning
The check to ascertain the battery's state of health
did not complete. Repeat the procedure, or consult
Hilti Service.
If a connected product can still be used, the re-
maining battery capacity is below 50 %.
If a connected product can no longer be used, the
battery has reached the end of its useful life and
has to be replaced. Consult Hilti Service.
≤ 40 m
(≤ 131 ft - 3 in)
2 m ... 65 m
(6 ft - 7 in ... 213 ft - 3 in)
3 s
±4.25°
±3.0 mm in 10 m
(±0.12 in in 32 ft - 10 in)
5 m (16.4 in) 2.5 mm
(0.10 in)
10 m (32.8 in) 4.0 mm
(0.16 in)
Class 2, visible, 510­530 nm
B 22­55 14 h at 24 ℃
(14 h at 75 ℉)
B 22­85 24 h at 24 ℃
(24 h at 75 ℉)
B 22­55 22 h at 24 ℃
(22 h at 75 ℉)
B 22­85 32 h at 24 ℃
(32 h at 75 ℉)
1 h
IP 54
BSW 5/8" | UNC 1/4"
0.05 ... 0.08 mrad * 180°
< 2 mW
For laser class 2 the
accessible emission limit is
AEL class 2 = > 2 mW
510 nm ... 530 nm
± 10 Nm
< 80 µs
< 12 kHz
1.29 kg
140 mm x 128 mm x 180 mm
(5.5 in x 5.0 in x 7.1 in)
Laser beams and Nuron B 22
battery status indicator
2394965
*2394965*