Publicidad
Idiomas disponibles
Idiomas disponibles
Sound power level according to Australia
NSW Noise Control Regulation.
Noise
The typical A-weighted noise level determined according to EN62841-4-2:
Model
UN001G
NOTE: The declared noise emission value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE: The declared noise emission value(s) may also be used in a preliminary assessment of exposure.
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual use of the power tool can differ from the declared val-
ue(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running idle in addition to the trigger time).
Vibration
The vibration total value (tri-axial vector sum) determined according to EN62841-4-2:
UN001G
NOTE: The declared vibration total value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also be used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the power tool can differ from the declared
value(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running idle in addition to the trigger time).
Declarations of Conformity
For European countries only
The Declarations of conformity are included in Annex A
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING
Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
Model
Intended use
The tool is intended for trimming hedges.
Sound pressure level
L
(dB(A))
Uncertainty
pA
K (dB(A))
82
3
Left hand (Front grip / Handle)
2
ah (m/s
)
Uncertainty K
(m/s
4.9
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Cordless pole hedge trimmer safety
warnings
Cordless hedge trimmer safety warnings:
1.
Do not use the hedge trimmer in bad weather
conditions, especially when there is a risk of
lightning. This decreases the risk of being struck
by lightning.
2.
Keep all power cords and cables away from
cutting area. Power cords or cables may be
11 ENGLISH
Guaranteed
Measured sound power
sound
level
power
level
L
(dB(A)) L
(dB(A)) Uncertainty
wA
wA
94
93
Right hand (Rear grip)
2
ah (m/s
)
2
)
1.5
3.5
K (dB(A))
1.5
Uncertainty K
2
(m/s
)
1.5
Publicidad
