GB
Thermostat adjustment
The thermostat is default factory set, and as
a general rule not supposed to be adjusted.
In the event, it is assessed by a cold chain
technician that a thermostat adjustment is
required, follow this instruction.
Steps:
1. Press < > "up/down" and hold 5 seconds
to access the menu.
2. Press on/off button
you see numbers flashing
3. Push either < for adjusting lower or > for
adjusting higher
4. To save press on/off button
then freezing symbol
Warning!
Thermostat tampering can lead to unsatis-
factory cooling, risking damage to stored
vaccines.
If adjustment is required ONLY to be perfor-
med by trained cold chain technicians.
Adjust the controller max. 1⁰C at a time.
After adjustment monitor appliance carefully
for min 24 hours
x 2 times till
x 1 time
2 time
26