Descargar Imprimir esta página

Miele DSM 409 Instrucciones De Manejo Y Montaje página 11

Electrónica de manejo para el extractor

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 14
Functional description
The control module enables the follow-
ing:
- The cooker hood hob lighting can be
switched on and off via a light switch
integrated in the domestic installa-
tion.
If the cooker hood has a dimmer,
dimming is also possible.
- The potential-free connection is used
to control another appliance depend-
ing on the switch status of the cooker
hood fan.
Installation
Before installation, disconnect the
cooker hood and the components to
be connected from the power supply.
A position is provided on the cooker
hood for installing the control module.
This position is shown in the images at
the end of these operating instructions.
However, the control module may also
be installed at another suitable location.
Make sure that the control module
housing is earthed. An earthing wire is
provided.
 Remove the cooker hood if this is ne-
cessary to install the control module.
Please observe the installation in-
structions supplied with the cooker
hood.
 If the control module will be difficult
to access after installation, connect
the relevant components before in-
stallation (see "Electrical connec-
tion").
en - Operating and installation instructions
Ensure that the connection cable and
electrical connections for the con-
nected components are laid correctly.
They must not be kinked or crushed.
 Secure the control module with the
screws supplied.
 Insert the connection cable for the
control module into the bushing on
the cooker hood electronic module.
Electrical connection
Wiring diagram
The wiring diagram for connecting the
components can be found at the end of
these operating instructions.
Key:
ZLT ...........................................Light switch
PK .......................... Potential-free contact
N1...........Cooker hood electronic module
N2............................DSM control module
Connecting the light switch
The cooker hood hob lighting can be
switched on and off and dimmed (de-
pending on the appliance features) via a
light switch integrated in the domestic
installation. The lighting can also con-
tinue to be operated on the cooker
hood.
11

Publicidad

loading