Makita DTW074 Manual De Instrucciones página 5

ENGLISH
(Original instructions)
1 Red indicator
2 Button
3 Battery cartridge
4 Indicator lamps
5 Check button
6 Switch trigger
7 Reversing switch lever
8 Lamp
SPECIFICATIONS
Capacities
No load speed (min
Impacts per minute
Max. fastening torque
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heaviest
combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Intended use
The tool is intended for fastening bolts and nuts.
General Power Tool Safety Warnings
WARNING Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Explanation of general view
9 Display
10 Indication button
11 Indicating lamp
12 Socket
13 Anvil
14 O-ring
15 Pin
16 Standard bolt
Model
Standard bolt
High tensile bolt
Square drive
–1
)
Overall length
Net weight
Rated voltage
DTW074
M5 – M12
M5 – M10
9.5 mm
0 – 2,500
0 – 3,500
65 N•m
144 mm
D.C. 14.4 V
BL1415NA / BL1460A
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF
ENE036-1
CORDLESS IMPACT WRENCH SAFETY
WARNINGS
GEA010-2
1. Hold the power tool by insulated gripping sur-
faces, when performing an operation where the
fastener may contact hidden wiring. Fasteners
contacting a "live" wire may make exposed metal
parts of the power tool "live" and could give the oper-
ator an electric shock.
2. Wear ear protectors.
3. Check the impact socket carefully for wear,
cracks or damage before installation.
4. Hold the tool firmly.
5. Keep hands away from rotating parts.
6. Do not touch the impact socket, bolt, nut or the
workpiece immediately after operation. They may
be extremely hot and could burn your skin.
17 Fastening torque
18 Fastening time
19 Seconds
20 Number of impacts
(Presetting number)
21 High tensile bolt
DTW104
M5 – M12
M5 – M10
9.5 mm
0 – 2,700
0 – 3,500
95 N•m
144 mm
1.1 – 1.3 kg
D.C. 14.4 V
GEB138-2
5